Page 2
Daslight This guide shows you how to set up the D700 in Daslight. All pictures provided were taken with Daslight 5 but it is also applicable to most other Daslight versions. All files mentioned in this guide can be found on the USB drive, in the Asparion Configurator installation folder or on our website.
Page 3
Step 2: Open Daslight Click on …->Edit->Settings…...
Page 4
Step 3: Go to MIDI Check MIDI Input and MIDI Output of D700...
Page 5
Step 4: At the top right corner press Set MIDI Mappings...
Page 6
Step 5: Right click on the highlighted control that you want to bind to the D700 and press Create Note/Control Shortcut Then move a Fader, rotate an encoder, or click a button to assign it to the selected element...
Page 7
Hints: When connected properly the faders will move with the controls in the program, the led rings will show feedback and the buttons will light up...
Page 8
For more information visit www.asparion.de...
Need help?
Do you have a question about the D700 and is the answer not in the manual?
Questions and answers