Asparion D700 Manual

Hide thumbs Also See for D700:

LV1

D700

Table of Contents

Need help?

Do you have a question about the D700 and is the answer not in the manual?

Page 1 D700...
Page 2 This guide shows you how to set up the D700 in LV1. All pictures provided were taken with LV1 14.9 but it is also applicable to most other LV1 versions. All files mentioned in this guide can be found on the USB drive, in the Asparion Configurator installation folder or on our website.
Page 3 Step 2: Open LV1 Click on SETUP->SYSTEM INVENTORY Add a Mackie to CONTROLS...
Page 4 Step 3: Go to Settings and select D700 as Device 1 Check Function Keys to User Keys 1-8...
Page 5 Step 4: (optional) If you want to connect more than one extension, select D700 also as Device 2 If there is only one D700 showing up, you need to enable the extensions first. How you can do that is described in the main manual.
Page 6 Step 5: (optional) Under Setup->U/I Settings you can adjust the key assignments of the D700 In the factory preset these are the corresponding keys: D700 Magic * Metronome Loop Record Play Stop...
Page 7 Hints: With the knobs Pan, EQ, Send and FX you can assign a function to the encoders In the EQ mode, click a freq encoder to change the mode and a gain encoder to turn on/off In Send mode a click activates/deactivates the respective channel In the FX mode the encoders control the selected effect of the selected track With a double click on the arrow keys, you can switch between the encoder pages...
Page 8 For more information visit www.asparion.de...