Designated Use - Hella TOP MINI plus RvA Operating Manuallines

Operating guidelines
Storing
- Keep dry when storing!
- Cover the boxes with materials that are impervious to light.
- Do not use transparent foils, because this can cause the welding of the
EPS due to the possibly occurring lens effect.
Protection of the product during construction phase
During the construction phase, the element to be mounted must be
protected against the weather. Materials made of EPS must be plastered
within three months.
Recommendations:
- Protection of the insulating material by applying a plaster base
- Covering the upper surface (do not use transparent foils!)
Subject to technical modifications – Date of Issue
September/2023
Operating guidelines

Designated use

Roller shutter profile K52:
Roller shutter profile A37:
Roller shutter profile A52:
Subject to technical modifications – Date of Issue
September/2023
Operating guidelines
Designated use
Sun protection
Thermal protection
Sight screen
Anti-glare blind
Noise insulation
Protection against burglary
Weather protection
Do not use the units or retract the blinds with strong wind, continuous rain, snowfall or
frost. We recommend the use of wind warning systems in combination with the appropriate
control devices to retract the sun protection devices with predefined wind forces after a set
time delay.
Wind resistance class
according to EN 13659
Nominal test pressure
p [N/m²]
Safety test pressure
1.5 p [N/m²]
Maximum wind speed
v [km/h]
Wind force according to
Beaufort
Roller shutter profile K37:
13 14
Operating guidelines
Servicing, maintenance and repair
An unintentional switching on of units with motor drive is possible. Make
sure that the automatic control device is switched off and that the current
supply is interrupted during cleaning or maintenance work. If the unit is
operated manually, the operating crank handle must be unhooked and
kept in a safe place.
Do not use solvents, alcohol (rubbing alcohol) or scouring cleansing
agents! Use a mild household cleaner and a soft cloth to wash down
fingerprints and light grease- or oil patches. Rinse off with clear water
and dry with a soft cloth.
Never press the profiles sharply, there is risk of snapping. Never use a
high-pressure cleaner. There is a risk that the surface of the profiles is
affected by the pressure and the heat.
Remove regularly dirt or objects from the guide rails.
15 16
0 1 2 3
<50 50 70 100
<75 75 100 150
<38 38 49 61
<5 5 6 7
Subject to technical modifications – Date of Issue
September/2023
Cleaning:
As a sun protection device fixed outside, your units can get
dirty in the course of time. This will not reduce the usability
of your unit. The powder-coated parts will remain
presentable for longer, if they are cleaned regularly with a
soft woollen cloth.
Subject to technical modifications – Date of Issue
September/2023
4 5 6
170 270 400
250 400 600
74 88 117
8 9 11