TECHNICAL SPECIFICATION ......................3 Structure............................... 3 Wind class ..............................5 Electrical components for Tarasola Loft ................ 5 Fabric components in the canopy ..................7 Technical limitations of the fabrics ..................8 CANOPY USER MANUAL AND GENERAL SAFETY REGULATIONS ......9...
This booklet also contains guidelines for use and service activities. PRODUCT IDENTIFICATION The following describes a folding canopy with the trade name Tarasola Loft. It is an aluminum structure with fabric cover, operated by automatic mechanisms. Designed in accordance with the EU Council Regulation – CONSTRUCTION PRODUCTS. When...
Page 4
6. Aluminum anti-wind beams - guide, stretch, and strengthen the material of the beam with the fabric. Note: there may be slight color differences between various suppliers of paint powders. Fig. 1 Graphical representation of the Tarasola Loft structure...
Fig. 3 List of wind classes – Tarasola Loft Electrical components for Tarasola Loft Tarasola cooperates with the best suppliers on the market in order to ensure the highest level of offered products. Thanks to the electrical components used in our products, we are offering a comprehensive product to our Clients - the best on the market.
Page 6
Fig. 4 Electrical drive with remote control. Fig. 5 Electrical drive with a switch. It is not recommended to connect more than one motor to one switch (and vice versa). The exception is having a switchboard. Warning! All wiring connection diagrams shall be obeyed, otherwise warranty may be voided. REMOTE CONTROLLER Manual radio control of one or more RTS drives and/ or radio receivers or a group •...
Stopping the motion and/ or forcing the motion via a convenient button. • Remote controller is equipped with an adjust function which enables, for e.g., intensity • of illumination to be adjusted. A convenient LED indicates that an action was requested by the user and enables •...
CANOPY USER MANUAL AND GENERAL SAFETY REGULATIONS Proper functioning and avoidance of breakdowns resulting from improper use shall be ensured by following the rules below. The entirety of the support is burdened with a load which may cause oscillatory motion. This motion is not an indicator of structural weakness but shall be considered normal for a complex structure.
Page 10
The canopy is not designed to carry snow loads. In the event there is snow on the canopy panels or the panels are covered in ice, please remove the snow and/ or ice layer immediately. In order to maintain the water drainage system unobstructed, it is necessary to check and remove waste such as leaves, conifer needles, and other type of waste from the gutters at least twice a year.
Page 11
them later. In the event of heavy wind and heavy rainfall, there is a possibility that rainwater may enter between the canopy profiles and the guides, which in turn may result in a leak inside the canopy. In the event of heavy wind and heavy rainfall, there is a possibility that rainwater may enter between the canopy profiles and the guides, which in turn may result in a leak inside the canopy.