3. TECHNICAL SPECIFICATION ............4 3.1 Structure ................4 3.2 Wind class ................6 3.3 Electrical components for Tarasola CUBIC ........6 3.4 Fabric components in the canopy ..........8 3.5 Technical limitations of the fabrics ..........9 4. CANOPY USER MANUAL AND GENERAL SAFETY REGULATIONS 10...
Tarasola-branded product. This booklet also contains guidelines for use and service activities. PRODUCT IDENTIFICATION The following describes a folding canopy with the trade name Tarasola Cubic. It is an aluminum structure with fabric cover, operated by automatic mechanisms.
TECHNICAL SPECIFICATION 3.1 Structure The canopy structure consists of an aluminum substructure. The structural elements are thick-walled extruded profiles, coated with a layer of thermally hardened powder varnish. Supporting structure consists of the following elements: 1. Aluminum guides - the number and spacing of the guides depends on the width of the unit.
Page 5
Fig. 1 Graphical representation of the freestanding Tarasola Cubic structure Fig. 2 Graphical representation of the Tarasola Cubic wall structure...
Fig. 3 List of wind classes – Tarasola Cubic 3.3 Electrical components for Tarasola Cubic Tarasola cooperates with the best suppliers on the market in order to ensure the highest level of offered products. Thanks to the electrical components used in our products, we are offering a comprehensive product to our Clients - the best on the market.
Page 7
Fig. 4 Electrical drive with remote control. Fig. 5 Electrical drive with a switch. It is not recommended to connect more than one motor to one switch (and vice versa). The exception is having a switchboard. Warning! All wiring connection diagrams shall be obeyed, otherwise warranty may be voided.
or a group of RTS drives and/ or radio receivers. Handling of a single device or a group of devices is possible. • Stopping the motion and/ or forcing the motion via a convenient • button. Remote controller is equipped with an adjust function which enables, •...
covered by the warranty. Waves - may form close to the sewing or welding of the fabric as well as on the side of the edge, due to double thickness of the fabric. Fraying and abrasion - if the canopy is exposed to constant high winds, it may show signs of wear, tear, and abrasion.
Page 11
Please contact the Manufacturer in the event of a canopy malfunction or failure. Users shall not make any repairs to a faulty canopy. The manufacturer shall not be liable for random events affecting the product, such as: weather conditions below/ above the standards presented product...
Page 12
animals inside) – ICING. Due to temperature differences, dew may appear on profiles and on the fabric, as well as condensation of water vapor under the canopy may occur – this shall not be deemed a product defect. Waste causing mechanical damage to the fabric or the structure shall be removed before the roof is folded.
Page 13
It is forbidden to unfold the canopy during snowfall and hail. Failure to comply with this recommendation may damage the fabric, reduce its properties and, as a result, tear it. Using the canopy during conditions exceeding the indicated wind standard may result in damage or destruction of the canopy. It is forbidden to place any items or objects on the material of the structure.