TECHNICAL SPECIFICATION ......................3 Structure............................... 3 Wind class ..............................6 Electrical components for Tarasola Flat ................ 6 Fabric components in the canopy ..................8 Technical limitations of the fabrics ..................9 CANOPY USER MANUAL AND GENERAL SAFETY REGULATIONS ......10...
This booklet also contains guidelines for use and service activities. PRODUCT IDENTIFICATION The following describes a folding canopy with the trade name Tarasola Flat. It is an aluminum structure with fabric cover, operated by automatic mechanisms. Designed in accordance with the EU Council Regulation – CONSTRUCTION PRODUCTS. When...
Page 4
Supporting structure consists of the following elements: Aluminum guides - the number and spacing of the guides depends on the width of the unit. Front clamping profile – an aluminum profile that connects the structure from its front side. 3. Support pillars - aluminum leg profile together with an integrated water drainage system.
Page 5
Fig. 1 Graphical representation of the freestanding Tarasola Flat Fig. 2 Graphical representation of the Tarasola Flat wall structure.
Fig. 3 List of wind classes – Tarasola Flat Electrical components for Tarasola Flat Tarasola cooperates with the best suppliers on the market in order to ensure the highest level of offered products. Thanks to the electrical components used in our products, we are offering a comprehensive product to our Clients - the best on the market.
Page 7
Fig. 4 Electrical drive with remote control. Fig. 5 Electrical drive with a switch. It is not recommended to connect more than one motor to one switch (and vice versa). The exception is having a switchboard. Warning! All wiring connection diagrams shall be obeyed, otherwise warranty may be voided. REMOTE CONTROLLER Manual radio control of one or more RTS drives and/ or radio receivers or a group of •...
Remote controller is equipped with an adjust function which enables, for e.g., intensity • of illumination to be adjusted. A convenient LED indicates that an action was requested by the user and enables • selection of a channel in the remote controller (in case of multi-channel remote controllers).
DaN (DIN 53363); 2 fire resistance class M2 (NFP 92-507); allowed temperature changes: -30/+70˚C; 100% watertight. Cleaning and care: water, light detergent + soft cloth. SOLTIS W96 1100 Dtex polyester with double-sided PVC coating; micro-perforated PVC cover; shiny coating. Weight 620g/m2, tensile strength 220/220 daN/5cm (EN ISO 1421), tear resistance 25/20 daN (DIN 53.363), thickness 0.56 mm, fire resistance: 1 class (UNI 9177- 87), 2...
CANOPY USER MANUAL AND GENERAL SAFETY REGULATIONS Proper functioning and avoidance of breakdowns resulting from improper use shall be ensured by following the rules below. The entirety of the support is burdened with a load which may cause oscillatory motion. This motion is not an indicator of structural weakness but shall be considered normal for a complex structure.
Page 11
The canopy is not designed to carry snow loads. In the event there is snow on the canopy panels or the panels are covered in ice, please remove the snow and/ or ice layer immediately. In order to maintain the water drainage system unobstructed, it is necessary to check and remove waste such as leaves, conifer needles, and other type of waste from the gutters at least twice a year.
Page 12
In the event of heavy wind and heavy rainfall, there is a possibility that rainwater may enter between the canopy profiles and the guides, which in turn may result in a leak inside the canopy. In the event of heavy wind and heavy rainfall, there is a possibility that rainwater may enter between the canopy profiles and the guides, which in turn may result in a leak inside the canopy.