Dettson EVO Installation And Owner's Manual page 125

16.Wireless control connection
NOTE:
· Make sure your devices are powered on.
· Keep your mobile phone close enough to your device when you are
connecting the network to your device.
· Connect your mobile phone to the wireless network at home, and
make sure you know the password of the Wireless Network.
· Check if your router supports 2.4 GHz Wireless Network band and
turn it on. If you are not sure whether the router supports 2.4 GHz
band, please contact the router manufacturer.
· The device cannot connect to the Wireless Network that requires
authentication, and it usually appears in public area such as hotels,
restaurants, etc. Please connect to a Wi
authentication.
· It is recommended to use a Wireless Network name that only
contains letters and numbers. If your Wireless Network name
contains special characters, please modify it in the router.
· Turn off the WLAN+ (Android) or WLAN Assistant (iOS) function of
your mobile phone when connecting network to your devices.
· In the case that your device connected to Wireless Network before
but it needs to reconnect, please click "+" on app Home page, and
add your device again by the device category and model according
to the instructions on app.
reless that does not require
58