Queries And Settings - Dettson EVO Installation And Owner's Manual

15.Queries and settings

45
When the unit is off, press "COPY" for 3 seconds to display P:00. If
it is connected to an indoor unit, display P:00. if it is connected
to multiple indoor units, press "
press "Confirm" to enter the correct temperature of the indoor
unit Tn (T1~T4) temperature and fan fault (CF) while using press
" "or " " to select.
Not operating keys for 15 seconds or pressing "Back"
or press "ON/OFF" drops out of query temperature.
When the unit is off, into the query function of temperature,
press " " or "
static pressure value.
When the unit is off, into the query function of temperature,
press " "or "
press "Back" or press "ON/OFF" or press "Confirm"drop out of
test mode. In AF mode, 3~6 minutes test completion
automatically exits, if the test process, press "Back" or press
"ON/OFF"or press "Confirm", the test exits will be interrupted.
" to select SP, press "Confirm" to adjust the
" to select AF, press "Confirm" into test mode,
"or " " P:01, P:02, and then