Selecting A Supported Display Mode - Lenovo ThinkVision T27hv-30 User Manual

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer� Therefore, refer to your
computer documentation on how to change display modes�
The image size, position and shape might be changed when the display mode changes� This is
normal and the image can be re-adjusted using automatic image setup and the image controls�
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free�
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 2560 x 1440 at 60Hz, which is
a common display mode�
The display modes shown below have been optimized at the factory�
Table 2-2. Factory set display modes
Address ability
720 x 400
640 x 480
1024 x 768
1280 x 1024
1440 x 900
1600 x 900
1680 x 1050
1920 x 1080
2560x1440
Refresh rate
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz, 75Hz
Chapter 2� Adjusting and Using your monitor 2-10