Table of Contents
Advertisement
Notice for use
Product overview
Adjustment type
Tilt
To set up your monitor, please see the illustrations below�
Note: Do not touch the screen of the monitor� The screen is made of glass and can be damaged by
rough handling or excessive pressure�
1�
Take out the Top cushion and accessories�
2�
Mounting the stand to monitor's recess�
Insert the three tabs on the upper part of the stand to the groove on the back of the monitor�
Press the stand down till it snaps into place�
3�
Insert the base towards the stand and tighten the thumbscrew�
4�
Stand up the monitor with both hands carefully�
Note: To connect VESA mounting accessories, refer to "Wall Mounting (Optional)" on page 2-12�
In this section, we will describe how to adjust the position of the monitor; how to set user controls;
how to use the cable lock slot�
Please see the illustration below for an example of the tilt range�
1
2
Chapter 1� Getting started 1-2
Advertisement
Table of Contents
