Maintenance And Storage - MADER LSL2001 Manual

Before performing maintenance, the log splitter must be placed in maintenance mode.
1.) Turn off engine.
2.) Disconnect spark plug wire.
3.) Move the control valve handle forward and backward to relieve hydraulic pressure.
After performing maintenance, make sure all guards, shields, and safety features are put back
in place. Failure to follow this warning can result in serious injury.
Refer to the engine owner's manual for engine maintenance.
What
Hoses
Hydraulic Fittings
Nuts and Bolts
Beam
Moving Parts

Maintenance and Storage

When
Each Use
Each Use
Each Use
Each Use
Each Use
Skin injection hazard.
High pressure fluid can inject under skin resulting in
serious injury including amputation.
-Make sure all fittings are tight before applying
pressure. Relieve system pressure before
servicing.
-Do not check for leaks with hand. Instead, use a
piece of cardboard to check for leaks.
-If skin injection happens, seek immediate
"Surgical Treatment".
Inspect for exposed wire mesh and leaks. Replace
all worn or damaged hoses before starting engine
Inspect for cracks and leaks. Replace all damaged
fittings before starting engine
Check for loose bolts
Apply grease to beam surface
Clear debris
WARNING
How