Table of Contents
Advertisement
Using the DISPLAY Button
The display function gives you information about the status of your VCR.
Location on screen
Upper left corner
Upper center
Upper right corner
Lower left corner
Lower center corner
Lower right
Accessing the DISPLAY screen
Press the DISPLAY button while the cassette is playing or
1
recording. After approximately 3 seconds, the display
automatically changes, then only the counter and graphic
displays are shown.
Press the DISPLAY button to switch the counter mode
2
between showing the time remaining on the tape, and the
present time of day.
Press the DISPLAY button again to remove display from
3
the TV screen.
Note: In order for display information to be accurate, set up the tape length in the VCR Function Setup first (page 13).
VCR Operation
Display information
The VCR function (play, stop or record).
Audio Status
Channel VCR is tuned to.
Amount of time that has elapsed since
the counter was last reset.
Tape speed (SP, SLP and ULP).
Tape remaining graphic
STOP
((MAIN))
6
0:01:30 SP
0:01:30
Rem 4:59
15
Advertisement
Table of Contents
