Selecting The Cassette Type; Selecting The Recording Speed; Nicam - Samsung SV-646L Instruction Manual

01371A SV-646I/XFA-GB2 8/27/56 1:30 PM Page 20

Selecting the Cassette Type

GB
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
2
USER SET
3
4
O K E N D: M E N U
5
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM :AUTO

NICAM

:ON
ECO. MODE :OFF
6
IPC :ON
E N D: M E N U

Selecting the Recording Speed

You can record a cassette at two different speeds:
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
In Long Play modes:
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours To record a cassette...
In standard play mode
In long play mode
20
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the corresponding , or , buttons to select the
USER SET option.
Press the OK button to select this option.
Press the corresponding o r buttons, until the T A P E
S E L E C T option is selected.
Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
Press MENU twice to exit the menu.
SP (Standard Play)
LP (Long Play)
Each cassette lasts twice as long
Press the SPEED button on the
remote control, until...
S P is displayed.
L P is displayed.
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 28.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or buttons, until the N I C A M
is selected.
5
To... Press or , until...
Mono mode O F F is displayed.
O F F : Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode O N is displayed.
O N : Normally set at this position.
6
On completion, press MENU twice to exit the menu.
GB
USER SET
O K E N D: M E N U
option
O S D : O N
TAPE SELECT : E 1 8 0
COLOUR SYSTEM :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
E N D: M E N U
21