Mounting Configurations - Cooper Lighting Envoy Brochure

7
8

MOUNTING CONFIGURATIONS

STANDARD J-BOX MOUNT
[Recessed]
The J-Box is recessed/cast into ceiling.
Envoy is attached using the quick mount
release bracket system.
TRUNNION-MOUNT [TM]
The trunnion mount bracket allows direct
attachment to ceiling using anchors and
provides a 1/2" threaded connection box
for wiring connections outside the fixture.
Trunnion mount is adjustable from 8 3/8"
to 13 1/4" depth off mounting surface to
top of fixture. Water-tight power cord
option is available.
THROUGH BRANCH WIRING
Rated for use with 4IN/4OUT #12GA wires. Through branch wiring requires Conduit Tap [CT] option and provides [2] 3/4" NPSM threaded hubs for wire
access into side of fixture.
13 1/2"
[343mm]
Approx.
STANDARD J-BOX MOUNT
[Surface]
The J-Box is surface mounted to ceiling
where J-Box and conduit are visible. Envoy
is attached using the quick mount release
bracket system.
8 3/8"
[213mm]
Adustable to
13 1/4"
13 1/8"
[334mm]
DIRECT SURFACE MOUNT WITH
CONDUIT
Cast in "knock outs" are provided on the
back surface of the cast housing to allow
mounting directly to concrete surface
using anchors. Power is routed through
Conduit Taps [CT] option, that are located
90° offset from latches.
14 7/8"
[378mm]
Approx.
PENDANT BOX/BIRD GUARD [PBG]
The pendant box accessory also acts as a
bird guard and may be used with a free
swinging or rigid pendant system,
allowing the fixture to level and hang
straight. Envoy is attached using the same
quick mount release bracket similar to
J-Box installation.
20 7/16" [519mm]
7/8"
[22mm]
13 1/8"
[334mm]
4 1/16"
[104mm]
WALL MOUNT [WM]
The wall mount arm allows you to match
path or perimeter lighting within or
outside the garage. Envoy is attached
using the same quick mount release
bracket similar to J-Box installation.
Power is routed in wall and through
access hole within arm to fixture.
3 7/16" [88mm]
16 5/8"
[423mm]
13 15/16"
[354mm]