Ensure that the AC power supply in your house complies with the identification sticker located on the back of your
player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation
(3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not
place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the
disc tray is empty. This player is designed for continuous use. Switching off the player to the stand-by mode does
not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove
the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect the main
plug from the socket.
Main voltage peaks due to lightning could
damage the unit.
Do not expose the unit to direct sun radiation or
other heat sources.
This could lead to overheating and malfunction of
Protect the player from moisture(dripping or splashing and that no
objects filled with liquids,such as vases, shall be placed on the player),
and excess heat(e.g.fireplace) or equipment creating strong magnetic
or electric fields (i.e.speakers...) disconnect the power cable from the
mains electricity supply if the player malfunction. Your player is not
intended for industrial use but for domestic purposes only. Use of this
product is for personal use only. Condensation If your player or disc
have been stored in a cold atmosphsre. as for example during trans-
portation in the winter, wait for approximately 2 hours until they have
reached room temperature.