• This function can program up to 30 tracks during stop mode.
ex) To program No.4 track of No.2 disc
Press the PROGRAM button.
Select the disc by pressing the
DISC CHANGE button.
Press the DISC CHANGE button.
Press the track number to be programmed.
Press the digit buttons.
Ex) Select track 4
In a second
After step 3, you must press the PROGRAM button
again then the selected number is programmed.
Up to 30 tracks can be programmed by repeating
step 2 to 4.
Press the PLAY/PAUSE button.
Programming is completed, and the first track of the
program is played.
When the Previous/Next button is pressed, the next or
previous programmed track is played.
If the PROGRAM button is pressed during programming,
it can not be programmed anymore, press again to continue.
To escape program function, Press the Open/Close
button, or press the STOP button twice.
P : 01
D1 - 000
• This function works only in the VCD play mode.
Press and hold the ZOOM to button to change
the screen to 2 x ZOOM.
While in the 2 x ZOOM screen, press and hold
the ZOOM button again to change the screen
to 4 x ZOOM.
While in the stage of No.1 or No.2 above,
the screen to the left, right, up, or down.
While in the 4 x ZOOM, press and hold the
ZOOM button, and display normal picture.
, buttons to scroll