Program Function - Samsung Z-48Q Owner's Instructions Manual

Z-48Q-2 5/13/03 13:42

PROGRAM FUNCTION

This function can program up to 30 tracks during STOP mode.
•
ex) To program No.4 track of No.2 disc
1
Press the PROGRAM button.
PROGRAM
2
Press the track number to
be programmed.
•
Press the digit buttons.
Ex) Select track 4
4
3
In a second
•
After step 2, you must press the PROGRAM
button again then the selected number (04) is
programed.
•
Up to 30 tracks can be programmed by
repeating step 2 to 3.
PROGRAM
14
Page 14
PROGRAM
P : 01 00
PROGRAM
PROGRAM
P : 01 04
PROGRAM
PROGRAM
P : 02 00
PROGRAM
4
Press the PLAY/PAUSE button.
• Programming is completed, and the first
track of the program is played.
• When the PREVIOUS/NEXT button is pressed,
the next or previous programmed track is
played.
P : 01 00
NOTE
•
If the PROGRAM button is pressed during programming, it
can not be programmed anymore, press again to continue.
•
To escape program function, Press the OPEN/CLOSE
button, or press the STOP button two times.
SELECT
PROGRAM No
Track No