Table of Contents
Advertisement
Installation
4.
Replace the centre switch
unit and clip the faceplate back
into place. Make sure that the
faceplate hooks in from the top
as shown. A sharp click will
indicate that the plate has been
successfully replaced.
Changing the Battery
The
battery
compartment
accessed from the rear of the
switch. If the switch is wall
mounted, the compartment can
be accessed by removing the
central section as previously
described. A CR2032 standard
coin cell battery is required to
power the unit.
is
Advertisement
Table of Contents
Need help?
Do you have a question about the MEGAMAN JSJSLW201 and is the answer not in the manual?
Questions and answers