Download  Print this page

Mp3(Wma)-Cd Playback; Skip/Search Function - Samsung yePP MCD-CM300 Instruction Manual

Portable mp3-cd player mp3-cd, wma-cd, cd-da playback
Hide thumbs

Advertisement

MP3(WMA)-CD Playback

1
Slide the OPEN button to
open the door, and insert
an MP3(WMA)-CD.
• Push the door to close it.
2
Press the PLAY/PAUSE
( √» ) button.
• The inserted MP3(WMA)-CD
will be scanned for about
30~90 seconds. Playback will
then commence.
Your CD Player will take a
few moments to scan through
all the tracks and the sessions
recorded on an MP3(WMA)-CD.
3
To stop playback, press the STOP ( )
button.
• Press and hold the STOP ( ) button to
switch off the unit.
Note
• If a music file is corrupted and a particular section cannot be read, only
that section will be skipped. But if the file continues to be unreadable,
the player will skip to the next file.
• Files that do not conform to specifications (refer to P. 32) will be skipped.
When the Open switch is slid to open the door, playback will stop.
The quality of MP3(WMA)-CD playback may vary depending on the condition of the
disc containing the music files or the condition of the recorder with which the disc
was created.
If different types of files or unnecessary folders are on the same disc, you will have
problems with playback.
13
Playtime
indicator
Directory
FLAT
NOR
0:03:15
Directory
Number
001
Boyz II MEN
indicator
indicator
001
End [Boyz II MEN]
Title indicator
Track
Number
128 kbps
L
L/R Channel
44KHz
indicator
R
Level Indicator
Bit rate indicator
Sampling Frequency
Indicator

SKIP/SEARCH function

Skip
Press and release the Iî or ïI button
during playback of a CD.
• Press the ïI button to play the next track.
Press the Iî button to go back to the beginning
of the current track. (Briefly press the Iî button
twice to repeat the previous track).
• Press the ïI button while the unit is in "STOP"
(no playback) mode. Track 2 will be played back.
Press the Iî button to play back the previous song.
Name
Search
Press and hold the Iî or ïI button
during playback of a CD.
• Press and hold the Iî or ïI button.
The CD will playback in fast forward or fast reverse mode.
• Release the button to return to normal playback mode.
HOLD function
• Buttons pressed during CD playback will not function.
(The "HOLD" message will appear on the display.)
• Use the HOLD function when carrying your CD Player around with you.
Use of this function will allow you to conserve battery life as it prevents
the CD Player from being turned on if a button is pressed unintentionally.
• The remote control will still operate while the HOLD function on the
main unit is active.
• The main unit will still operate while the HOLD function on the remote
control is active.
Main Unit
Remote Control
Bottom of the Main Unit
14

Advertisement

Table of Contents
loading

  Related Manuals for Samsung yePP MCD-CM300