Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung EV-Z1 Instruction Manual

EV-Z1GB-RDS 6/4/03 9:47
Searching for and Storing the
Radio Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing Band on the
remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4
Select the station to be stored by:
Pressing or
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: 'Program No.' is displayed for a few seconds.
b Press Program/Set to store the radio station.
Result: 'Program No.' is no longer displayed and the station is
stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
5
Program/
Set
4
Mono/ST
Page 15
).
Frequency Modulation
Medium Wave
Long Wave
Press Mode on the remote
Control
One or more times until Manual is
displayed.
One or more times until Auto is
displayed.
buttons to increase or decrease the
or buttons.
2
Band
VOL.
3
Mode Mode
4
VOL.
Mute

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing Band on the
remote control.
3
Select the radio station as follows.
To listen to ... Press ...
Stored station 1. Press the Mode button on the remote
control until "Preset" is displayed.
2. Press
required program.
Program/
VOL.
Set
3
Mode
Mode
3
VOL.
Mono/ST

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
Program/
VOL.
Set
Mode
VOL.
Mono/ST
GB
) .
or button to select the
2
Band
3
Mute
Band
Mute
14