USING THE FLASH MODE
You can select the flash mode by pressing the FLASH button.
Flash button
<Red-eye reduction>
<Auto flash>
<Flash off>
<Fill-in flash & red-eye reduction>
<Fill-in flash & back-light control>
<Fill-in flash>
NOTE
After taking a picture with the "Fill-in & Back-light control" mode, the camera will return to normal mode automatically.
In case of the "Auto flash" function, the camera will retain the mode even though the camera is turned off. When you
turn on the camera, check the LCD panel.
In this case, the location of a zoom can be changed from tele into wide, this is to change zoom location automatically
for preventing a picture from becoming dark. (The function of Auto flash zoom compensation)
24