Advertisement
If you have any questions or comments, please call the Snow Joe® + Sun Joe® customer service department at:
1-866-SNOWJOE (1-866-766-9563)
SAVE THESE INSTRUCTIONS
Read all safety warnings, instructions, illustrations and specifications provided with this device.
When using the device, basic safety precautions should always be followed. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Do not expose the device to rain or wet conditions. Water entering the unit may damage the device and increase the risk of electric shock.
Do not use the device if damaged or modified. A damaged or modified device may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not touch the inflator + deflator or its power cords with wet hands.
The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.
Symbols | Descriptions |
![]() | READ THE OPERATOR'S MANUAL – Read, understand, and follow all instructions in the user manual before attempting to assemble and operate. |
![]() | Double Insulation – When servicing, use only identical replacement parts. |
Read the owner's manual and safety rules carefully before using your Inflator + Deflator. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and attachments. Save this manual for future reference.
High Pressure Motor: 85 W
High Volume Motor: 60 W
Power Input: 120V AC | 60 Hz
12V DC Plug
AC Cord Length: 5.9 ft. (1.8 m)
DC Cord Length: 9.2 ft. (2.8 m)
High Pressure Hose Length: 25 in. (64 cm)
High Volume Hose Length: 16 in. (40 cm)
Max. Pressure: 125 PSI (860 kPa)
Working Pressure: 60 PSI (410 kPa)
Duty Cycle*: 10 min
High Pressure Air Flow: 0.6 CFM (17 L/min)
High Volume Air Flow: 14 CFM (396 L/min)
LED: 2.4 W
Net Weight: 3.6 lbs (1.6 kg)
*Do not operate for more than 10 minutes at a time, after which it must be switched off and allowed to cool down for at least 15 minutes before restarting.
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!
This device can be powered from a 120V AC electrical outlet or from the 12V DC socket in your vehicle. Both cables are permanently fixed to the unit and can be stowed in their respective compartments.
Flip the AC/DC switch left or right for the respective cable you wish to use. Return it to the center to turn off the device (Fig. 1).
Using the AC cable stored on the bottom of the device (Fig. 2), plug the end of the cable into an electrical outlet or an extension cord (Fig. 3)
NOTE: This device is equipped with a polarized plug (one blade is wider than the other) which will only fit in a polarized outlet one way. If the plug does not fully fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
If using an extension cord, ensure it is a properly wired and in good condition. If used outdoors, only use a UL-, CSA-, or ETL- rated extension cord for outdoor, all-weather use. Follow the table below for the minimum extension cord thickness and length. Feel free to use an extension cord with a thicker (lower number) gauge than shown.
Wire Gauge (AWG) | Max Length |
16 | ≤ 50ft (15m) |
14 | ≤ 100ft (30m) |
Using the DC cable stored on the right side of the device, plug the 12V DC plug (also known as a car charger) into the 12V DC socket of your vehicle (Fig. 4).
Do not leave items unattended during inflation. These items can burst and could cause serious injury.
The pressure setting displayed on the LCD screen is not perfectly calibrated to exact values. After inflation, tire pressure must be checked using a calibrated pressure gauge before driving the vehicle.
Risk of injury. Do not direct air stream at body.
Hot surface. To reduce the risk of burns, do not touch the air chuck during inflation.
Schrader valves (cars, motorcycles and mountain bikes) can be attached directly to the air chuck without any additional attachments.
The high pressure air hose can also be used with the provided adapters to inflate a variety of items. To use the adapters, lift up the air chuck clamp and insert your adapter of choice into the air chuck. Then press down on the air chuck clamp to secure the adapter in place (Fig. 11).
Presta valves are commonly used on road bikes and some mountain bikes. To inflate a bicycle tire, you will need to use the presta valve adapter.
Inflate all kinds of sports balls with the Sports ball needle (Fig. 14).
Inflate all kinds of small plastic or rubber inflatables such as pool rings, floats, air pillows and more with the tapered adapter (Fig. 15).
The high volume air hose can be used to inflate a variety of large inflatables such as rafts, bouncy castles, air beds, inflatable pools and more.
The LED light switch controls the LED light on the left side of the Inflator + Deflator (Fig. 20). Follow the table below to activate the two different modes.
LED Switch | LED |
1st press | Solid white |
2nd press | Red + white blinking |
3rd press | OFF |
Store the device away from hot surfaces or under direct sunlight to reduce the risk of a short circuit.
Have your device serviced by a qualified repair person using only identical replacement parts.
Do not allow brake fluids, gasoline, petroleum-based products, solvents, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic, which could result in personal injury.
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing of a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to those parts in the product.
The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is functioning properly. Recycle the package afterwards or keep it for long-term storage.
WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or local store for recycling regulations.
If your Auto Joe™ ATJ-AIR1-HYB Inflator + Deflator requires service or maintenance, please call Snow Joe® + Sun Joe® customer service at 1-866-SNOWJOE (1-866-766-9563) for assistance.
When contacting the company or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the registration card. Copy these numbers into the space provided below.
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the ATJ-AIR1-HYB and is the answer not in the manual?
Questions and answers