Maintenance - Bush BSC90EB Instruction Manual

Care and maintenance
Looking after your appliance
be cleaned with wet cloth. Color change on ceramic
surfaces does not affect functional structure and
durability of ceramic.
Color change is caused by not cleaning the residues,
erosion due to casseroles and using not appropriate
cleaning materials and is not due to material change.
Hob Surface
Enamelled Parts:
In order to keep them a new, it is necessary to clean
them frequently with mild warm soapy water and then
dry with cloth. Do not wash them while hot and never
use abrasive powders or abrasive cleaning materials.
Do not leave vinegar, coffee, milk, salt, water, lemon, or
tomato juice to remain in contact with enameled parts
for long periods of time.
Stainless Steel:
Stainless steel parts must be cleaned frequently with
mildly warm soapy water and a soft sponge and then
dry with a soft cloth. Do not use abrasive powders
or abrasive cleaning metarials. Do not leave vinegar,
coffee, milk, salt, water, lemon or tomato juice to
remain in contact with stainless steel parts long periods
of time.

Maintenance

Changing the Oven Lamp
The product should first be switched off from the
electricity supply and cool (not been used recently).
Remove the glass lens, and then the bulb itself.
Place new bulb into the socket (resistant to 300
(degrees) 230V, 25 Watt, Type E14).
Put the lens back into place. Your oven is now ready for
use again.
This product is designed for cooking only and should
not be used for room illumination.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
Fig 31.
Other Controls
Periodically check the gas connection pipe. Even if
any simple abnormality is felt, inform the technical
service to have it changed. We recommend the gas
connection parts to be changed once a year. If any
abnormality is felt while operating the control knobs of
cooker, contact to the authorized service.
Care and maintenance
33