Use Of Digital Timer (Age96Rs/Age96Ra) - Bush BSC90EB Instruction Manual

Functions
Simple everyday use
Use of Digital Timer
Time Adjustment:
The time must be adjusted before starting to use the
oven. Following the power supply to the oven, the
symbol (A) and the three "0" on the screen will begin to
flash.
Press the (+) and (-) keys simultaneously. The symbol
will appear on the screen. Also, the dot in the
middle of the screen will begin to flash.
Using the (+) and (-) buttons, adjust the day's time while
this dot is flashing. After the adjustment, it should be
expected that the dot will be lit continuously.
Following the power supply to the oven, when the
symbol (A) and the three "0" on the screen begin to
flash, the oven can not be operated using the control
buttons. When the (+) and (-) buttons are pressed
simultaneously for time adjustment, the symbol
appear on the screen. When this symbol appears on
the screen, you can manually operate the oven part.
As the adjusted time will be reset in the event of a
power failure, time adjustment operation will have to
performed again.
Fig 16.
Audible Warning Time Adjustment
The time must be adjusted before starting to use the
oven. Following the power supply to the oven, the
symbol (A) and the three "0" on the screen will begin
to flash. Press the (+) and (-) keys simultaneously. The
symbol will appear on the screen. Also, the dot in
the middle of the screen will begin to flash.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
26 Functions
Using the (+) and (-) keys, adjust the day's time while
this dot is flashing. After the adjustment, it should be
expected that the dot will be lit continuously. This
function can be used to recieve audible warning at the
completion of the adjusted time period.
Press the MODE key in the middle. The
flash on the screen. Also three "0"s will appear. Adjust
the desired time period for the warning by using (+) and
(-) keys while the
Some time after the completion of the adjustment,
the symbol will begin to light continuously. When
the symbol begins to light continuously, the audible
warning time adjustment is done.
The audible warning time can be set to a time between
the time range of 0 and 23.59.
When the set time is up, the timer gives an audible
warning and the
screen. Pressing any key will stop the audible warning
will
and the symbol disappears on the screen.
Audible Warning time adjustment is for warning
purposes only. The oven will not be activated at this
function.
Fig 17.
Semi - Automatic Time Adjustment
According to Cooking Period:
This function is used to cook in the desired time range.
The foods to be cooked are put into the oven. The
oven is adjusted to the desired cooking function. The
oven thermostat is adjusted to the desired degree
depending on the dish to be cooked. Keep pressing
on the MODE button until you see "stop" on the timer
symbol will
symbol is flashing.
symbol begins to flash on the