global_main.book.book Page 33 Thursday, January 19, 2023 8:42 AM
NOTE
• Selecting this option will tumble the clothes
briefly every few minutes for up to 30 minutes
after the selected programme finishes. While
this option is running,
ENd
display.
TurboClean
Adding this option reduces the programme time
but the similar washing results will be provided.
Follow the next steps to use a special
option.
1
Press the Power button.
2
Select a washing programme.
3
Change the washing programme (Temp., Spin,
Rinse+ and Intensive) as necessary.
4
To use special options,
Optional 1: Press Steam or TurboClean
button.
Optional 2: Press and hold Steam button for 3
seconds to select the Wrinkle Care option.
5
Press the Start/Pause button.
Using Basic Options
You can customize the programmes by using the
following basic options:
Pre Wash
This option is recommended when washing a
heavily soiled load.
1
Press the Power button.
2
Select a washing programme.
3
Press the Pre Wash button as necessary.
4
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
appears on the
1
2
3
4
5
6
NOTE
• For safety reasons, the door remains locked
Delay End
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
1
2
3
4
NOTE
• Except for LED of the Delay End button, all LEDs
OPERATION
Press the Start/Pause button.
Press the Power button.
Select a washing programme.
Press the Start/Pause button.
Press the Add Item button as necessary.
Open the door after it unlocks itself and add or
remove necessary clothing items.
Close the door and press the Start/Pause
button.
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Press the Power button.
Select a washing programme.
Press the Delay End button as necessary.
Press the Start/Pause button.
on the control panel will be turned off within 20
minutes. This feature may vary depending on
the model purchased.
33
Need help?
Do you have a question about the WV9-1610B and is the answer not in the manual?