Better Bathrooms BeBa_24920 User Manual

Better Bathrooms BeBa_24920 User Manual

Non-illuminated bathroom mirror

Advertisement

Non-Illuminated Bathroom Mirror
BeBa_24920 & BeBa_24921
• Single-person assembly
• We always recommend using professional
tradespeople to install your product
V1_30.10.2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BeBa_24920 and is the answer not in the manual?

Questions and answers

Summary of Contents for Better Bathrooms BeBa_24920

  • Page 1 Non-Illuminated Bathroom Mirror BeBa_24920 & BeBa_24921 • Single-person assembly • We always recommend using professional tradespeople to install your product V1_30.10.2020...
  • Page 2 Congratulations on your purchase And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
  • Page 3 Parts Mirror x 1 Wall Screws x 2 Hanging Bracket x 1 (depending on model) Wall Plugs x 2 Tools required Installation – Check the product for damage prior to installation Before any drilling is carried out, please check for pipes and wires within the wall which could be damaged.
  • Page 4 Model A Offer the hanging bracket up to the wall in the desired location. Mark the screw hole locations on the wall through the hanging bracket, ensuring the holes are level, using a spirit level. Drill the wall at the marked points on the wall for your required orientation and insert the wall plugs and tap until flush with the finished wall surface.
  • Page 5 Model B Before any drilling is carried out, please check for pipes and wires within the wall which could be damaged. Decide upon the hanging orientation of the mirror and measure between the fixing points on the back of the mirror. Mark this dimension on the wall, ensuring the holes are level, using a spirit level.
  • Page 6 Tighten the screw until it is between 2 -4 mm from the wall surface, as shown below When the screw is correctly located, offer the rear of the mirror to the wall to engage the bracket onto the screws. When the bracket is hooked onto the screw gently push down on the mirror so that the screw pushes into the slot on the rear, as shown below Screw positioned in the hole on the mirror, before pushing down the mirror secure the screw into the slot...

This manual is also suitable for:

Beba_24921

Table of Contents