Better Bathrooms Arragon BeBa 27633 User Manual

Better Bathrooms Arragon BeBa 27633 User Manual

700mm basin vanity unit - drawers

Advertisement

Quick Links

Product Code – BeBa_27633
Arragon 700mm Basin Vanity Unit - Drawers
• Multi-person assembly
• We always recommend using professional tradespeople
to install your product
V1_13.08.2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Arragon BeBa 27633 and is the answer not in the manual?

Questions and answers

Summary of Contents for Better Bathrooms Arragon BeBa 27633

  • Page 1 Product Code – BeBa_27633 Arragon 700mm Basin Vanity Unit - Drawers • Multi-person assembly • We always recommend using professional tradespeople to install your product V1_13.08.2021 •...
  • Page 2: Congratulations On Your Purchase

    Congratulations on your purchase And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
  • Page 4: Tools Required

    Tools required Troubleshooting Drawer not straight / not closing See drawer adjustment guide Leaking Check sealant, reapply if necessary...
  • Page 5: Installation

    Installation Please spend 5 minutes reading this section before commencing with the installation of your new furniture 1. Should any of your items have a defect, please do not install as returns will not be accept once fitted. 2. We advise that you use a qualified person to install your units, as any issues relating to poor fitting will not be accepted by the supplier. 3.
  • Page 7 Info : 1- Place the wall hanging brackets against the wall and mark the drill holes, so that they are aligned with the measurements of the unit and are level. To do this use a tape measure and spirit level.
  • Page 8 İnfo : 1- Drill the holes into the wall at 8 mm diameter and to a depth of 100 mm. 2- Apply a small amount of silicone into the hole. 3- Insert the dowels(Wall plugs) into the holes and tap flush to the wall surface using a hammer.
  • Page 10 İnfo : 1- When installing the basin into the unit , apply silicone between the basin and unit as shown above. 2- For ease, install the basin mixers before installation of the basin.
  • Page 12: Drawer Removal

    Drawer Removal 1- Pull the drawer to yourself. 2- Pull the drawer to outside by pressing the latch locks at the same time. 3- Lift the drawer up and out of the unit. Drawer Adjustment...
  • Page 13: Maintenance

    Maintenance Please note that although these units have been designed to give years of pleasure and satisfaction, you will help maintain the original beauty of your bathroom by following these guidelines. Melamine, vinyl and foil wrapped doors Occasional marks, can in most cases, be removed with a soft damp cloth. More persistent marks can be removed using a non-silicone- based furniture cleaner.

Table of Contents