Performing Blood Pressure Measurement - G-Lab MD1500 Instruction Manual

PERFORMING BLOOD PRESSURE MEASUREMENT

1. Press key to turn on the device.
2. The cuff deflates to remove residue air before starting
measurement. Releasing air indicator blinks on the display.
3. Memory record number appears on the display.
4. The cuff starts to inflate. It is normal for the cuff to feel tight.
Pressurize indicator, the corresponding pressure bar
indicators and the current cuff pressure appear on the display.
If you want to stop cuff inflation, press
device and the cuff will deflate.
5. The monitor automatically determines your ideal inflation level
and will stop inflation automatically. When inflation completes,
deflation will start automatically. The device is measuring the
blood pressure and the pulse rate while the cuff is deflating.
Releasing air indicator, the corresponding pressure bar
indicators and the current cuff pressure appear on the display.
As soon as a pulse is detected, the Heart Mark
heartbeat.
If the cuff pressure is not high enough to detect the blood
pressure, the device will re-inflate the cuff to a higher
pressure and restart the measurement.
6. When the measurement is completed, the systolic pressure, the
diastolic pressure and pulse rate are displayed and are stored to
memory. The cuff deflates to remove residue air automatically.
Deflation before
measurement
key to turn off the
Inflation Stop
flashes at every
7. Press
The device will automatically turn off after 2 minute of
inactivity.
- 11 -
Display Memory Inflation in Progress
Record Number
Deflation and Measurement
Measurement in completed,
Progress Display with data
key to turn off the device.