Advertisement
Getting started
Preparing for use
Always check the laundry care label and adjust the temperature and steam accordingly for the type of fabric.
Test on a hidden area to begin with.
Fabric type
Temperature setting
Cotton/linen
Silk/wool
Synthetics
IMPORTANT: The Automatic shut-off switches off the iron if it has been stood in the upright position for 8
minutes and 30 seconds when facing in a downward position and not been moved for an extended period of time.
The iron will beep and the heater indicator light will constantly flash. Gently shake the iron to re-use, the heater
indicator light will illuminate red when heating up, the light will turn green when temperature has been reached
and it's ready to use.
Stand the iron in the
Select to the required
upright position on a heat
temperature setting.
resistant levelled surface.
Steam setting
Steam boost
Spray burst
Adjustable
Yes
Optional
N/A
No
Optional
N/A
No
Optional
Select the required steam
Plug into mains. The
setting. Make sure the
heater indicator light will
steam setting selected is
illuminate red to show that
suitable for the ironing
the power is on and the
temperature.
unit is heating. When the
selected temperature has
been reached the light will
turn green to indicate the
unit is ready to use.
Features
Spray burst
Steam boost
The spray burst will
The steam boost function can only be used at
moisten the fabric to help
temperature settings between
remove stubborn creases.
to help remove stubborn creases.
Press and release the
Press and release the
spray burst button.
steam boost button.
Vertical steam boost
Anti-drip
The steam boost function
The anti-drip function
can be used to iron in the
stops drops of water
vertical position to remove
falling onto your
creases from hanging
clothes when ironing
clothes and curtains.
at low temperature.
Using your appliance
and Max
Advertisement
