Maintenance - PRIXTON TITAN MGF300 Manual

CHARGING
Tipo-C USB
(Equipped by user)
The device should be fully charged before first use
Charging time is about 2-3 hours.
To charge, simply plug the Type-C into the charger. The LEDs will flash and show the
battery level. When the device is fully charged, the LEDs will turn green.
Always unplug this device from the electrical outlet immediately after fully charging.
To reduce the risk of hazards, do not use the device while charging.
The device should be charged when the battery is low; if the device is not charged for a
long time it may not work again.
STORAGE AND MAINTENANCE
STORAGE
If the device has been stored for more than 3 months, inspect and recharge it before use.
Do not place it on the floor, next to walls, or on the roof. Make sure ventilation is good and
keep the device away from strong sunlight and corrosive gases.
TRANSPORTATION
The device is packed with a simple shockproof package and is suitable for transportation
by air, rail, road, and ship. This device should avoid rain, snow, inversion, and collision.
POWER SUPPLY CHECK
Check the power supply carefully before using the device, if the power supply voltage
exceeds the specified range, please do not use it.

MAINTENANCE

This device should be protected from moisture, rodents, and pollution. Please turn off the
device when cleaning. After use, please put the device in a safe place. Do not place heavy
objects on the unit. When the device is malfunctioning,, please ask professional
technicians to repair it, do not disassemble it by yourself.
DISPOSAL AND RECYCLING
This device should not be disposed of together with household garbage. When you decide
to dispose of this device, please follow the local environmental laws and disposal
guidelines.