PRIXTON TITAN MGF300 Manual page 11

OPERATION
POWER ON
Switch your device to ON position at the base of the handle, once your device is powered
on the blue lights will illuminate to indicate the battery level. The number of -0- will be
shown on the LED display.
SPEED SETTING
To change the speed setting by pressing the speed button once per speed. It will switch
between 1st speed, 2nd speed, 3rd speed, 4th speed, 5th speed, 6th speed, and neutral in
turn.
Note: In order to avoid damage to bones and fascia caused by long-term massage, this
product has set an intelligent protection mode, which will automatically stop after 10
minutes.
POWER OFF
To power off, switch the device to OFF position at the base of the handle.
USING/REPLACING HEAD ATTACHMENTS
To use a head attachment, insert the desired head directly into the shaft/opening while
pushing firmly. To replace, turn the device off then simply rotate or pull out the originally
attached head.
INTERCHANGEABLE HEAD ATTACHMENTS
Flat (toughened
PP)
Ball (EVA foam) Fork (toughened PP) Bullet (toughened
PP)