Washing Clothes Using The Cycle Selector - Samsung WA5471AB Series User Manual

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Press the Power button.
2. Open the door.
3. Load the articles of clothing one at a time loosely into the drum, without overfi lling it.
4. Add liquid detergent only, softener, and/or bleach (if necessary) to the appropriate
compartments. See pages 24~25.
5. Close the door.
6. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Normal, Heavy Duty, Perm Press, Sanitize, Towels, Bedding, Eco Cold, Stain Away, Active
Wear, Delicates/Hand Wash, Wool, Quick Wash, Rinse + Spin. The relevant indicators will
illuminate on the control panel.
7. At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
8. Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
When the Garment + LED is on, you can add laundry items to or remove laundry items from the
wash.
To remove or add laundry items when the Garment + LED is on, follow these steps:
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT.
2. Remove or add laundry items.
3. Close the door, and then press the Start/Pause button to restart the wash.
If you have Child Lock on, you must deactivate it fi rst. See page 21.
When the cycle is fi nished:
After the total cycle has fi nished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
washing a load of laundry _23