Snow Chains - PEUGEOT 308 2023 Handbook

Practical information
It is necessary to remove the fixings:
– Marked 2 for all versions except GT.
– Marked 1 for all GT versions.
► To remove the corresponding fixings, use a
cutter-type tool, following the groove set into the
inner face of the screen.
Fitting
186
Lower/upper screens
► Offer up one of the lower screens on the
corresponding side of the lower bumper grille,
aligning it around the number plate holder.
► Insert the fixing lugs into the bumper until
they are all properly seated.
► Check that the unit is firmly held by pressing
around the edges.
Repeat the same steps for the other lower
screen, then for the upper screens in the upper
bumper grille, aligning them with the top of the
grille.
Centre screen
► Offer up the centre screen below the brand
badge.
► Insert the fixing lugs into the bumper until
they are all properly seated.
► Check that the unit is firmly held by pressing
around the edges.
Removing
For the lower screen
► Insert a finger in the lower outside corner of
the lower screen.
► Pull towards you to guide the unclipping of
the unit.
For the upper screen
► Press on the lower fixing lugs to release them
from the grille.
► Gently tilt the upper screen downwards.
► Pull towards you to guide the unclipping of
the unit.
For the centre screen
► Press on the upper fixing lugs to release
them from the grille.
► Pull towards you to guide the unclipping of
the unit.

Snow chains

In wintry conditions, snow chains improve
traction as well as the behaviour of the vehicle
when braking.