Advertisement
STEP 3:
● From the mark made for the bottom mounting screw, measure up 6" and use the notch in the template
aligned on the side of the door (see image below) to mark the second mounting hole on each side of the door.
● From the mark made for the second mounting screw, measure up 6" and use the notch in the template
aligned on the side of the door (see image below) to mark the third mounting hole on each side of the door.
● Using a 1 /16" drill bit, drill a short pilot hole at each mounting location. DO NOT drill through the door.
6"
Bottom
Mounting Hole
Mark
STEP 4:
● Mount the door front to the wire rack using the door mounting screws (SS-10.1029).
3
Advertisement
