Advertisement
NOTE:
The 12" Tiered Pull-Out Organizer (478-3917) is intended for use in a 12"W x 24"D x 30"H Klëarvūe
Cabinet (478-0004).
The 9" Tiered Pull-Out Organizer (478-3918) is intended for use in a 9"W x 24"D x 30"H Klëarvūe
Cabinet (478-0001).
STEP 1:
● Line up the holes of the glides (SS-20.1089 / SS-20.1090) with the 3rd set of holes in the cabinet box
(counting up from the bottom) and secure with the euro screws (SS-10.1033).
STEP 2:
● On the back of the cabinet door, align the template (SS-20.1100) with the bottom and side edge of the door
as shown below.
● Make a mark for the bottom mounting screw using the template. You will be using the hole that is marked
with a circle around it on the template.
● Repeat for the opposite side of the door.
3rd Hole
Side of
Door
Mounting
Hole
Bottom of
Door
2
®
®
Advertisement
