Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the indicator on
the first button is flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the first button for 5 seconds until the button
indicator begins flashing rapidly.
Add device through network
1.
Once registered, tap "Add Device" on the app's home page, or the "+" in the upper
right corner, to add a new device through the network.
2.
Select the product type from the list of options in the app (Electrical > Smart
Touch Light Switch Gang).
3.
Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.
Advertisement
