Assistant AH-1033 - Multifunctional Pendulum Clock Manual

DEVICE OVERVIEW

[MODE] – Setting Key
[UP SNZ] – Key
[DOWN ] – Key
[ALARM] – Key
[SET °C/°F] – Key
Battery Compartment Cover
Logo Pad
Pendulum Positioner

FEATURES

• LCD clock with calendar
• Melody or beep alarm
• Countdown
• Pendulum

SPECIFICATIONS

BATTERY INSTALLATION

Remove the Battery Compartment Cover and insert 2xAA batteries into the battery compartment.
Note: Make sure that the «+» & «-» polarities are correct. Put the battery compartment cover back in position.
Do not mix old and new batteries.
Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

SETTING

In the normal status, every time press the [MODE] key to switch the setting modes in turn.
After entering the setting mode, every time press the [SET] key, each of the items is to be selected in turn.

When the selected item flashing, press the [UP] key to increase the number by degrees or [DOWN] key to decrease the number by degrees.
In the alarming setting and birthday wish setting, press the [SET] key to confirm setting, press the key again to display blank format for cancel the setting.
Exit by press the [MODE] key, turn into the next mode setting.

TIME SETTING

Setting Order
HOUR MINUTE YEAR MONTH DAY

ALARM SETTING

Setting Order
MINUTE MELODY NUMBER
In the normal status, press the [ALARM] key will turn into alarm setting directly.
There are 6 pieces of melody and 2 pieces of beep for selecting.
If the alarm has been set, the icon displays on screen in the normal status.

BIRTHDAY WISH SETTING

Setting Order
MINUTE YEAR MONTH DAY
If birthday wish setting has been completed, the icon displays on screen in the normal status.
On your birthday the device will play the melody «HAPPY BIRTHDAY TO YOU» for 5 minutes.

COUNTDOWN SETTING

Setting Order
MINUTE
The top setting value; 23h 59m.
After setting, press the [SET] key to activate countdown.
When countdown is in operation, the icon flashing.
(Countdown is active whether exit or no).
Melody playing at the end of countdown.

USAGE

In the normal status, press the key to switch the temperature display in degree Celsius (°C) or Fahrenheit (°F).
In the normal status, playing melody by press the key , six pieces of typical melody will playing circularly. When melody playing, the icon displays on screen. You can pause playing by press any key, but the key is recommended.
If alarm has been set, you can press the key to switch on or off snooze, the icon on display indicates that snooze has been switched on.

MAINTENANCE

Do not place the clock in moist, dust place or the place with corrosive gas.
Avoid heavy strike or vibration.
Keep the clock far away strong magnetic apparatuses.
Any +/ – 8Kv electrostatic and strong magnetic field environment, will causing malfunctions, you must install the batteries again.
If disusing the clock for a long time, please take out the batteries from the clock. Take the exhausted batteries out of the clock immediately.
The exhausted batteries should be disposed at special collection sites or return to your dealer.