Strong SRT 7807TIVU User Manual page 16

Transponder:
LNB Type:
DiSEqC:
DiSEqC Port:
Motor Position:
Unicable Channel:
Frequency SCR or dCSS:
22KHz:
LNB Power:
Type of search:
Once all options have been set correctly, press the BLUE button to start scanning for channels.
NOTE:
7.1.2 Manual Search
Satellite:
Frequency:
Symbol Rate:
Polarization:
Transponder Spec:
FEC:
Network Search:
12
This option allows you to select a TP of your choice by using t u buttons,
or press OK to view the entire list. Within the list it is also possible to add
or delete TPs or modify their parameters. For changes refer to the colored
buttons shown at the bottom of the screen.
Select the LNB type. The Universal LNB (09750/10600 MHz) is supported and
is the most common on the market for European Ku-band use. User allows
manual entry of the parameter. The other options must be selected only if
special LNBs are used by specialized personnel.
Set the DiSEqC type or the SCR/dCSS LNB.
If DiSEqC 1.0 or 1.1 is selected in the DiSEqC option, here it is possible to set the
port to be used for the selected satellite.
If DiSEqC 1.2 is selected in the DiSEqC option, here it is possible to set the
motor dish parameters. Press OK button to access the submenu.
If SCR or dCSS is selected in the DiSEqC option, here it is possible to set the
port up to 16 output.
The frequencies are set to default value. To modify them select DiSEqC, set
SCR or dCSS and press OK button. In the menu set User in the Unicable Mode.
Switch the 22 KHz oscillator signal to ON (22K) or OFF (0). Only for C-Band LNB
use. Refer to manual of LNB.
To turn the power on or off of the LNB.
Set Tivu + FTA to store the Tivùsat together to other unencrypted channels,
FTA only to store unencrypted channels only, or All to store all the channels
available.
If an SCR or dCSS LNB is used, please refer to the manual of the respective
LNB to obtain technical data on user bands numbers and corresponding
frequencies. SCR/dCSS cannot be combined with any other DiSEqC
function. SCR/dCSS can only work in combination with an optional multi-
output (max. 16) satellite splitter and an SCR/dCSS LNB. SCR/dCSS systems
are mainly installed by professional experts, who then assign the User Band
and Frequencies. If such a system is readily installed in your apartment
block, refer to the original installer or the maintenance department of the
housing block.
Select a satellite to be configured
Use the number keys 0~9 to enter a frequency, or press OK button to access
the TP list and select one existing TP.
Use the number keys 0~9 to enter che symbol rate.
Use the t u button to set the polarization.
Default value.
Default value.
Use the t u button to set the search.