Table of Contents
Advertisement
V C R O
P E R AT I O N
Using Program Review
Program Review allows you to review all of the programmed recordings currently stored
in the VCR' s memory and to remove a programmed recording quickly and easily.
1
Press the MENU button.
Press the UP/DOWN
button to select "VCR
Setup", then press the
LEFT/RIGHT œ œ √ √ button.
2
Press the UP/DOWN
button to select "Program
Review", then press the
LEFT/RIGHT œ œ √ √ button.
The information for the
first program appears on
the screen.
3
To see the information for
the program number,
press the RIGHT √ √ button.
4
If you want to remove a
program from memory,
press the CLEAR button
when the program you
want to erase appears on
the screen. That program
is erased from memory.
Press the MENU button to
exit.
Program Review is only available
if you have programmed your VCR
to record at a later time.
If you're recording through a
cable box, the Program Review
screen displays the output channel of
the cable box as the channel number
to be recorded.
The VCR is equipped with
a program memory backup that
saves all the timer program informa-
tion if the power to the VCR is
interrupted. If the unit has been
without power, all of the timer pro-
gram information will be disabled,
until you reset the clock. When the
clock is reset, the programs will be
restored.
89
Advertisement
Table of Contents
