T V O
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (ANT, STD,
HRC, AFN). See steps 1~2
on previous page.
Press the UP/DOWN
buttons to select
"Channel", then press the
LEFT/RIGHT œ œ √ √ buttons.
2
Press the UP/DOWN
buttons to select "Auto
Program".
3
Press the LEFT/RIGHT œ œ √ √
buttons.
TV will begin memorizing
all of the available chan-
nels.
4
After all the available
channels are stored, the
Auto program menu disap-
pears. Press the MENU
button to exit.
24
P E R AT I O N
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
√ √
Press the RIGHT
button at any
time to interrupt the memorization
process and return to the Channel
menu.