HP ProLiant DL585 Installation Instructions page 2

1 Prepare storage server
Remove shipping bracket from the PCI Basket, loosen the
thumbscrew (1) and remove and discard the shipping bracket (2).
NOTE: The shipping bracket is used only to secure the PCI
latches during shipment.
Install options
If you are installing additional options, such as expansion boards,
processors, hard drives, or memory, refer to the instructions
included with the option.
NOTE: For quick start memory guidelines, refer to the hood labels on the
server.
2 Storage server installation
1. Install the rails on both sides of the chassis.
2. Pull the rail compression lever toward you.
3. Install the rear of the rail into the designated holes in the rear of
the rack.
4. Install the front of the rail into the designated holes in the front
of the rack.
5. Install the rails on the chassis into the rails in the rack.
6. Slide the server onto the rack rails until the locking
pin engages.