Advertisement
Set...
Installing the oven accessories
1. Insert side racks
There is a left hand and right hand
version (see image for details).
1. Insert the rear peg into the rear
access hole provided, ensuring that
the peg is fully inserted.
2. Then locate the front peg into the
front access hole and push in firmly.
Telescopic slides can be purchased separately
2. To fit a shelf or tray to side racks:
1. Locate the rear edge of the
shelf/tray in between 2 guide
rails of the side rack - see
diagram.
2. Align the shelf to the same rail
positions on both sides, with
the front edge raised, begin to
slide the shelf into the oven.
3. When fully inserted the shelf/
tray should not interfere with
the closed oven door.
Set the time
You must set the time before you can operate
your appliance.
1.
After the appliance has been electrically
connected, '12:00' will be displayed and the
clock icon will flash
2.
Press + or - symbols to set the time of day
3. 5 seconds after the last change, the clock
icon will disappear, confirming the time has
been adjusted.
NOTE: The clock has a 24-hour display.
Left hand side rack
front peg
rear peg
Condition the oven
New appliances can have oil or residue left
from manufacturing. You will need to heat
your oven for 30 minutes before using it for
the first time.
1. Turn the function selector dial to FAN
FORCED
2. Using the temperature selector, set the
oven at 180°C for approximately 30 minutes.
Later run grill on maximum for 15 minutes
WITH GRILL DOOR OPEN. Please ensure
that the room is well ventilated during this
process.
Detent
(to burn off any residue)
Advertisement
