Connection Between Wws 100 And Wot 100; Technical Data - Window Master WOT 100 Installation Manual

Connection between WWS 100 and WOT 100

1 2 3 4
1 2
The outdoor temperature sensor WOT 100 is connected to #10 and #12
Sensor input 3 and GND respectively on WWS 100.

Technical data

Power supply
Bus current
Bus system
Sensors
CO meassurement
2
Humidity meassurement,
relative
Temperature meassurement
Operating conditions
Material
Mounting
Type of connection
IP rating
Class of protection
Calibration CO
2
Handling
Dimensions
Colour
5 6 7 8 9 10 11 12 13 14 15 16
Via WSK-Link™
< 10 mA
WSK-Link™
CO
±150 ppm during lifetime at 25°C and 950 - 1050 hPa
0–100%
0–50°C, ±0.5°C at 25°and ±1°at 0..50°C
0–50°C, for indoor wall mounting and must not be mounted in
dusty surroundings or covered
Self-extinguishing thermoplastic
Wall
WSK-Link™
IP 20 to DIN EN 60529
III when installed according to regulations
Factory calibrated to better than ±50 ppm at 600ppm and
1000ppm. Auto calibration via ABC-Logic™
Do not expose to mechanical shock or vibration
83 x 114 x 24mm (WxHxD)
Studio white (similar to RAL 9016)
, relative humidity, temperature, atmospheric pressure
2
8
WWS 100
WOT 100