Intended Use; Operating Environment; Operation; Interference - Window Master WOT 100 Installation Manual

Intended use

This product is designed for monitoring of the air quality in buildings like schools, offices,
hotels, conference venue etc.. Data transfer via bus system.
The device is not qualified for security relevant tasks such as emergency doors, fire
protection equipment, fermenting cellars etc.

Operating environment

Operate the device exclusively in a dry room. It is not intended for outdoor use and in wet
rooms.

Operation

Interference

The measurement results of the device can be influenced by external factors. Possible sources of
interference are:
• Air movement, e.g. through windows, doors, by convection, heating.
• Direct sunlight and other heat sources.
• If the device is installed close to electrical consumers e.g. dimmers.
• Vibrations or shocks.
• Pollution due to paint, wallpaper paste and dust from renovation/construction work
• Organic solvents and their vapours.
• Plasticizers from stickers and packaging: e.g. bubble wrap or polystyrene
The two touch buttons on the front are configurable, for
example, to open and close all windows in the zone or room.
After initial startup, the device requires up to 5 minutes until
the first correct measurement is available.
3