Storing The Channels Automatically - Samsung SP-43T6 Owner's Instructions Manual

Storing the Channels Automatically

You can scan the frequency ranges available on your television and
in your area and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to "Sorting the Stored
Channels" on page 21.
1
Press the MENU
Result: The main menu is displayed.
2
Move the joystick up or down until the CHANNEL is selected and
press the joystick (
Result: The CHANNEL menu is displayed with the AUTO STORE
selected.
3
Press the joystick (
Result: The AUTO STORE menu is displayed with the AREA
selected.
4
Select your area by moving the joystick left or right. The following
countries are available: ASIA/W.EUROPE - CIS/E.EUROPE -
CHINA - HONGKONG/UK - AUSTRALIA - NZ/INDONESIA - SOUTH
AFRICA - AMERICA.
5
Move the joystick up or down until the SEARCH is selected and
move the joystick left or right.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
6
When searching and storing is complete, the SORT menu is
displayed.
To...
Sort the stored channels
into the desired numerical order
Exit the channel store function
without sorting the channels
button.
) button.
) button again.
Then...
Go to Step 4 of the "Sorting
the Stored Channels"
procedure on page 21.
Press the MENU
repeatedly until the menus
disappear.
AUTO STORE
MANUAL STORE
ADD/ERASE
FINE TUNE
SORT
SELECT
AREA
SEARCH : -/+
SELECT
AREA
SEARCH : -/+
SELECT
P 8 C--
426 MHz
EXIT
button
FROM
TO
STORE : ?
SELECT
CHANNEL
√ √
√ √
√ √
√ √
√ √
ENTER EXIT
AUTO STORE
: ASIA/W.EUROPE
ADJUST EXIT
AUTO STORE
: ASIA/W.EUROPE
SEARCH EXIT
22%
SORT
: P 1
: P--
ADJUST EXIT
17
ENG