Related Manuals for IMS ROBOTICS DRIVE plus
Summary of Contents for IMS ROBOTICS DRIVE plus
- Page 1 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 DRIVE plus carriage und cutter drive Repair manual Created: 00145 Checked: 00047 Page: 1 of 8...
- Page 2 IMS Robotics GmbH reserves the right to make changes to this Repair Manual at any time and without notice in the event of any technical or typing errors contained in it.
- Page 3 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 Table of contents Preface ..................Fehler! Textmarke nicht definiert. Liability ....................Fehler! Textmarke nicht definiert. 1. Removal and assembly instructions ....................3 2. Dismanteling of the carriage ....................... 4 3.
- Page 4 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 2. Disassembly of the carriage 1. Dismantling the pressure bar 2. Dismantling of the cutting air hoses and the associated swivel screw connections 3. Disassembly of the housing cover 4.
- Page 5 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 5. Loosen the fastening screws on the housing cover (6 pieces in total) Attention The screws are secured with Loctite 274 blue during manufacture and can be...
- Page 6 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 In the sectional drawing you can see the position of the shaft (1) with the associated Gears (2, 3) and the two ball bearings (4, 5).
- Page 7 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 7. Set the bearing flange at a slight angle 8. Pull the axle together with the ball bearing out of the flange Hint If the ball bearing is not damaged, it can be used again.
- Page 8 Number: RH-11.010.A DRIVE plus carriage and cutter drive Scope: IMS Robotics Document managment Date: 28.03.2022 4. Resources Loctite 274 (blue) For securing screw connections Petrol or brake cleaner for degreasing and cleaning all metallic parts Created: 00145 Checked: 00047 Page: 8 of 8...