Important Instructions; Cleaning And Maintenance; Safety Cautions - Remington protect&shine S2006 Manual

ENGLISH
INSTRUCTIONS FOR USE
Due to the extreme heat capabilities of this styler, extra care should be taken when using.
Before use, make sure hair is clean, dry and tangle-free. Section hair prior to straightening
and always straighten the lower layers fi rst.
Plug in the unit, press and hold the on-off switch for two seconds to switch on. Press again
for two seconds to switch off.
Rotate the variable wheel to increase the temperature. The LED will stop fl ashing when the
desired temperature has been reached.
Run the straightener through entire length of the hair, without stopping.
Do not scratch the surface, as this could tear the Tefl on

IMPORTANT INSTRUCTIONS

Due to the extreme heat capabilities of this styler, extra care should be taken
when using.
While heating, during use and cooling, place on fl at, smooth, heat-resistant surface.
Only hold unit at the end of the handle.
This is a high performance product, avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surface, as this will deteriorate the effectiveness of the coating.

CLEANING AND MAINTENANCE

Ensure the unit is unplugged and cool prior to cleaning.
Wipe clean any build up of styling products with a slightly damp cloth (do not scrub).
NOTE: Excessive use of styling products may deteriorate the Tefl on
woven fi bre.
Do not use an abrasive cleaning fl uid to clean, as damage will occur.

SAFETY CAUTIONS

WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION
OF A RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL
OPERATING CURRENT NOT EXCEEDING 30mA IS ADVISABLE. ASK AN
ELECTRICIAN FOR ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM.
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR
OTHER VESSELS CONTAINING WATER OR OTHER LIQUIDS.
2
®
woven fi bre.
®