Table of Contents
Advertisement
Installing the display cable
CAUTION:
The information in this installation section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the display cable and provide a visual representation of the installation procedure.
Figure 50. Installing the display cable
Steps
1. Place the display cable on the display back cover.
2. Adhere the display cable to the display back cover.
Next steps
1. Install the
camera
module.
2. Install the
display
panel.
3. Install the
display
hinges.
4. Install the
display
bezel.
5. Install the
display
assembly.
6. Install the
wireless
card.
7. Install the
base
cover.
8. Follow the procedure in
After working inside your
computer.
Removing and installing Field Replaceable Units (FRUs)
75
Advertisement
Table of Contents
