Functional Description; Adjusting The Cutting Angle - Makita EN424MP Instruction Manual

12. Attach the cover, and then tighten 3 bolts. Remove
the bolt inserted into the blade cover in step 9, and then
tighten the bolt.
1
2
Fig.21
► 1 . Bolt 2. Cover
NOTICE:
If the shear blades do not operate prop-
erly, the blades are not engaging the crank prop-
erly. Remove the blades and install them again.
NOTICE:
If the parts other than the shear blades
such as the crank are worn out, ask Makita
Authorized Service Centers for parts replacement
or repairs.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.

Adjusting the cutting angle

CAUTION:
Always be sure that the tool is
switched off before adjusting the cutting angle.
The angle of the attachment can be adjusted by chang-
ing the position of the wheels. Loosen the bolt on the
wheels, then move the wheels to the desired position,
and then securely tighten the bolt to fix the wheels.
Fig.22
► 1 . Wheel
NOTICE:
Make sure that the plate on the pipe is
engaged with the wheels.
9 ENGLISH
1