Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CHISAGE CE-3P6KEG-Pro
Summary of Contents for CHISAGE CE-3P6KEG-Pro
-
Page 2: Table Of Contents
Contents Copyright © Zhejiang Chisage New Energy Technology Co., Ltd. 1. About the Manual ......................3 Without written permission, any information of this document (partly or 2. Product Overview .......................4 entirely) cannot be extracted, copied or transmitted in any form or by any 3. -
Page 3: About The Manual
Valid Region This manual applies to the operation of Zhejiang Chisage inverters in Australia, New Zealand, the UK, EU, South America, North America, and Southeast Asia. Name... - Page 4 2.2 Front Panel 2.3 Scope of Delivery Operation Panel： Description Quantity Name Communications Power Alarm Down Enter Light Light Light Inverter Wall Bracket LED Light： Expansion Screws Fastening Screws Light Status Explanation DC Connectors 3 / 4 (pairs) The inverter is generating power POWER AC Connectors The inverter is not generating power...
-
Page 5: Mounting
requirements of local power authorities. 3. Safety Wear protective equipment for all work on the machines: helmet, insulated footwear, gloves, etc. Ensure that unauthorized persons and children have no access to the 3.1 Safety Symbols machines. Do not open the housing of the machines at any time. Unauthorized Symbol Explanation opening will void guarantee and warranty and may damage the... -
Page 6: Inverter Mounting
The wall bearing inverters shall be able to hold the weight of at least 4 times of the weight of the inverters. The location shall be convenient for electrical connection, operation and maintenance. The ingress protection of the inverter is IP66, so it can be installed both indoors and outdoors. -
Page 7: Electrical Connection
5. Electrical Connection 5.1.2 Assemble DC cables to DC connectors: 1) Strip the insulation layer off the DC Cable for a little length. 2) Insert the wire into the Crimp Contact and crimp them with an electrical 5.1 DC Side Connection of Inverters crimp-er. - Page 8 5.2 AC Side Connection of Inverters For the sake of safety, it is recommended to use the AC cable of 4 mm An AC Connector is supplied together with the inverter. AC Connector 4) Connect the Nut, Sealing Plug, Housing and Terminal Block together, a small click confirms secure connection.
-
Page 9: Over Current Protection Device
LCD will display ‘ISO Out Range’ or ‘PEN No Connect’. In that case, sticks. The performance of inverters can be monitored remotely through a please refers to Chapter 7 for troubleshooting or contact Zhejiang Chisage for specified APP or website. -
Page 10: Electrical Connection Overview
Max measuring current for CT: 100A/phase 5.9 Residual Current Device (RCD) Detail specifications of meter and CT can be found on Zhejiang Chisage Website and a customer can purchase a suitable meter and CT for inverters An internal residual current device is integrated in the inverter to protect on the website. -
Page 11: Operation
(RCM) device is used for protection in a case of direct or indirect contact, only 6. Operation an RCD or RCM of Type B is allowed on the supply side of this product. 5.10 DRM (Demand Response Mode) 6.1 Start and Stop Inverters The DRM port is only applicable to installations in Australia and New Zealand 6.1.1 Inverter Turning-on as requires by the standard of AS/NZS 4777.2:2020. -
Page 12: Lcd Operation
Displays Duration Explanation 6.2 LCD Operation TOTAL ENERGY 6.2.1 Main Menu 10 S Total energy: total energy generated 50000 Kwh This Month: total energy generated When the inverter has been started, the LCD screen shows operation status ThisMon: 255Kwh this month and power of the inverter alternately every 10 seconds (refer to below figure). -
Page 13: Basic Setup
grid live line A This menu indicates the current Standard 10 S country grid code or safety standards cAusas4777_2A selected AC voltage B: the voltage of the utility AC VOL B: 230.6V grid live line B Customers are able to view those info without password including country 10 S AC CUR B: 38.8A AC current B: the current of the utility... -
Page 14: Detail Info - Maintenance Personnel Only
be set here, the address ranges from ‘01’ to ‘99’, and the default address is Energy, 10. Yearly Energy, 11. Export Total, 12. Export Today ‘01’. Press UP/DOWN to scroll the screen, press ENT to go into the selected YES = ENT EXIT = ESC sub-menu and press ESC to return to the main menu. - Page 15 When a fault happens, the Alarm Light will be on, and the LCD will display a 10 S This menu indicates: RCD(GFCI): brief description of the fault. Please refer to Chapter 7 for troubleshooting or Residual current protection PVISOGuard: contact after-sales department if a fault info. is displayed. Insulation Resistance/Ground fault protection...
-
Page 16: Technical Set - Maintenance Personnel Only
The sub-menu: 6.2.4.8 Daily Energy Display Explanation The energy generated for a specified day can be checked here. To enable the setting-up of all Select ALL Set Enable functions under the menu of 2020-02-22 Technical Set 6.2.4.9 Monthly Energy To set up safety standard or The energy generated for a specified month can be checked here. - Page 17 To set up the power control Power Control 6.2.5.1 All Set Enable This function is to enable all the setting-up functions under the menu of To set up the increase power rate Standard Func ‘Technical Set’. Before enabling or setting up any of the function under this limit and decrease power rate limit menu, please turn the ‘All Set Enable’...
- Page 18 one type of applicable voltage will this function be used. To set up power factor 6.2.5.4 AC Output Voltage Limit +80% This section is to set up the high and low limit of AC output voltage as To restore reactive power permitted by local grid company if the grid voltage is beyond the range Reset specified by national standards.
- Page 19 Step3: Go to set up the ‘ Pwr UpSlope’ or ‘Pwr DownSlope’ for the soft ramp up/down To enable the island protection Island Prot of rated power per minute. NOTE: This operation is for maintenance personnel only. To enable the buzzer Buzzer Enabled Password is required to access this part! 6.2.5.9 Special Function Setu...
- Page 20 Inverter reactive The QU Curve is enabled by default. The volt-var response mode changes the supplying absorbing power level reactive power absorbed or supplied by the inverter in response to the (Q)% of S rated voltage at its grid-interactive port. The diagram and table below are the Voltage 207 V 220 V...
- Page 21 status to ‘ON’ or ‘OFF’. NOTE: This operation is for maintenance personnel only. Password is required to access this part! 6.2.5.9.4 Fixed Power Factor Mode or the Reactive Power Mode PF CURVE Q CURVE Those modes are disabled by default. The fixed power factor mode or the reactive power mode may be enabled in some situations by the electrical Region Default Value...
-
Page 22: Maintenance And Troubleshooting
6.2.5.10 Password Set-up Press UP/DOWN to scroll the menu, press ENT to perform the selection, and The password for ‘Detail Info’ and ‘Technical Set’ can be reset here. press ESC to return to the previous menu. 6.2.5.15 Export Limit Password: 1100 ->Soft Limit Mode:... - Page 23 protection limit repeatedly 7.2 Disposing of Inverters If the inverters need to be disposed of, please do that according to the local 1. Check if the input voltage regulations for electrical equipment waste, and choose the right site for the Transient bus exceeds the inverter's upper disposing specified for electrical equipment waste according to local...
- Page 24 contact the installer Fault in current GFCI Device Restart the inverter or contact leakage testing Fault the installer Check if the ambient device temperature is below normal Temperatu Temperature working temperature of re Inside ACHCT Fault in HCT Inside Inverters inverters and increase Restart inverter or contact the Inverters...
- Page 25 1. Check the ventilation of Fault in Temp is Temperature is Restart the inverter or contact installation environment Relay Fault grid-connection Too High too high the installer 2. Avoid direct sunlight relay Check if the ambient Communication temperature is below normal fault between Temp is Temperature is...
-
Page 26: Specification
Specification...
Need help?
Do you have a question about the CE-3P6KEG-Pro and is the answer not in the manual?
Questions and answers